You can also try right click and uncheck smart tracking when you have the symbol selected.

You can edit the grass terrain drawtools to put the various grass textures on different sheets. Doing so will keep the new sheet in each map you create as you are editing the tool itself so it's not tied to the map.

Yep looks good now. Glad I could help. The lights behind the bar don’t look so strange now.

You have a purple/pink light in the upper left corner that appears to be set at 180 and facing the wall. It has a very hard line caused but the setting but the same corner in the lower left has a 360 light. I would change that upper light to 360 to remove the long harsh line it is creating unless that was the intent.

Try changing the light at 33,187 from 90 to 360.

Ok use the following setting to render the image.

Enter this command:

EXPORTSETMPPP - enter key

80000000 -enter key

then do your save as and select the image type you want and adjust options as below if needed. You can change the Width and height if you want but don't go too far above 35% antialias

Here is how I set up the options in the save dialog before saving the jpg / png

Also if you want editing lights to be easier create a sheet for each color and make sure you put each color light on the correct sheet. That way if you want to edit the pink lights hide all the other color lights and your light list will be easier to deal with.

have you set EXPORTSETMPPP to at least 40000000 ? this may help when exporting the image.