Next week, Ralf will be demonstrating the April 2025 Annual issue and its Bubble Gum Fantasy style.

Join us live on Youtube to be part of the chat: https://www.youtube.com/watch?v=RFdQCNPrpTI

Or watch the show later, either on Youtube or here on the forum*

*This thread isn't monitored during the session.

Does your map have a SCREEN sheet with a thick white border polygon on it? If it does, move that sheet to the bottom of the sheet list one up from any MAP FRAME or MAP BORDER sheet you have there, so that it covers the extra grid.

I think (but am not sure) that should be 'loosely'.

It's a good map :)

There's a slight horizontal bar running across it about 2/3rds down. That's almost certainly caused by the lighting and having 2 passes on the render. If you type EXPORTSETMPPP and get a result of just 4 million (4000000), type 40 million (40000000) and hit return. That should get rid of the mark by reducing the number of passes to 1.

And thanks - you're welcome. I fiddled around with the lighting tech, that's all.

Looking at the way the symbol is misaligned it appears to be too big - overlapping equally on 3 sides.

Get another symbol on your crosshairs and then right click. You will see a dialog there. Click the Set Normal button and ok. I'm hoping that should give you proper alignment.

Here are two ideas from the annuals:

https://www.profantasy.com/annual/2010/august10.html

https://www.profantasy.com/annual/2013/july13.html

Or you could use Mike Schley's Ink overland style? It's the same as the main style, but black and white.