Sanps Don't work with DD3

sevrick · October 2010

Ok I can do map CC3 Dungeon and the snaps work but not with DD3. What I'm trying to do is you a hex Grid overlay with proper snaps. I went to the tools, snaps, and grid settings. It says grid class: Rectangular. Yes Grid is selected and snap and cursor snap is too. I cant change it to "1 Meter, Grid, 2 Snap". I can see it and it's selectable but when click ok and go back it still says Rectangular. I don't know if the problem lays here or not. Please Help me.

sevrick · October 2010

Ok oops new info I found out that snaps were in deed on but very small so as to appear not working.

sevrick · October 2010

How do you increas the size of those white dots?

jaerdaph · October 2010

If you are using hexes, you don't want to use a rectangular grid. Right click on the Grid button and select on the pull down menu under Grid Name a hex grid at the snap distance you want. Also, make sure the Snap button on the bottom is depressed as well to snap to the grids.

sevrick · October 2010

What width and hight do I need for the white dots to be flush with the grid. Ok this is about the closest I've gotten to what I want but as you can see the dots don't line up with the grid.
Orientation
-Horizontal-
Width: 50m
Height: 43m
Origin: 0.00000m,0.00000m
-Vertical-
Width: 43m
Height: 50m
Origin: 0.00000m,0.00000m
And all the check boxes checked.

sevrick · October 2010

OK I figured it out. When I created a map I was adding the grid with the map when I created. When dealing with hexs I have to create it with out the grid at first then add them later for some odd reason. By the way if it doesn't work right a way give it a moment to refresh. I did this before thinking that it wasn't working so quickly changed to a new map. Thanks by the way for your help.

jaerdaph · October 2010

Cool - and I'm glad to hear you were able to figure it out on your own!

ProFantasy Community Forum

Sanps Don't work with DD3

Comments