Community Atlas - Stromphe - Speaker's Villa
![[Deleted User]](https://secure.gravatar.com/avatar/c75d9a245b74d9c59be0999ea81ca541/?default=https%3A%2F%2Fvanillicon.com%2F92add7f8c954488718110edc4896ad39_200.png&rating=g&size=200)
I am undertaking an ambitious project, do do all the floors of the Speaker's Villa (sort of equivalent to the Prime Minister's official residence, and a palace), based on this villa, the Villa of Pollio Felice, now renovated as a hotel in Italy.
Comments
Also try to make it with Overland map Mr. Quenten :)
The overland map is already in the Atlas - Stromphe - Dockside district.
https://atlas.monsen.cc/atlas/artemisia/hi/stromphe - dockside.png
The roof level, as shown, is being done first, and it is still very much in the planning phase, but the overall structure is set. It will indeed have open areas though - the solid roof is not a set feature. This is possibly a draft of a draft - just getting the structure from the district map, into this one.
The domes represent domes AND towers - this is not just a standard Roman villa, but an over-the-top mish-mash of styles as previous tenants have added their own bits.
Once the roof level is done, I will then do the floor levels for the villa only, not the surrounding buildings. There are 5 above ground levels, and there will be two below ground levels.
The floor area is 80 m x 60 m (about 262' x 197'). I prefer to use metric, because I really have no feel for imperial after so many years of using only metric in Australia, both in the community and at work. I still have no idea why imperial units persist.